Tubing, 8061 65 Braided Platinum-Cured Silicone Tubing, NALGENE®
home >
tubing >
tubing, 8061 65 braided platinum-cured silicone tubing, nalgene®
You have not viewed any products recently.
View Larger
- There are no alternate images available for this product.
- There are no alternate images available for this product.
Tubing, 8061 65 Braided Platinum-Cured Silicone Tubing, NALGENE®
Use Thermo Scientific™ Nalgene 65 Braided Platinum-Cured Silicone Tubing for a variety of pump and transfer applications, including pharmaceutical, laboratory, bioprocess manufacturing applications. This durable, high-purity tubing features an interwoven polyester braid for added safety, pressure and kink resistance.
Features a low binding surface to minimize absorption of proteins and food products
- Contains no phthalate plasticizers or peroxides to leach out into transported fluid
- Tasteless, odorless, noncytotoxic, and nonhemolytic
- Autoclavable; also can be sterilized by gamma radiation, ETO and chemical procedures
- Durometer hardness: Shore A, 65
- Sterilization Guidelines- If practical, Ethelene oxide or chemical sterilization is recommended. Even when autoclaved properly, large-diameter tubing (i.e. greater than ½ inch (12mm) may kink or distorted. If possible, select heavy-wall tubing.
- Autoclaving- (121°C/12 psig (1 bar) for 15 minutes): Clean and rinse tubing with distilled water before autoclaving. Certain chemicals which have no appreciable effect on resins at room temperature may case deterioration at autoclaving temperatures unless removed with distilled water beforehand.
- Gas- Ethylene oxide formaldehyde
- Disinfectants- Formalin, ethanol, etc.
- Radiation- Gamma Irritation at 50kGy