Acetonitrile, BAKER ANALYZED ULTRA LC/MS, J.T.Baker®
You have not viewed any products recently.
View Larger
- There are no alternate images available for this product.
- There are no alternate images available for this product.
Acetonitrile, BAKER ANALYZED ULTRA LC/MS, J.T.Baker®
Formula: CH3CN
Formula Weight: 41.05
For Use in LC/MS and UHPLC
| TEST |
SPECIFICATION |
| For Laboratory, Research, or Manufacturing Use |
| Assay (CH3CN) |
>= 99.9% |
| Appearance |
Passes Test |
| Gradient Elution Test (a.u.) - 254 nm |
<= 0.0005 |
| Gradient Elution Test (a.u.) - 210 nm |
<= 0.002 |
| Fluorescence Trace Impurities, measured as Quinine Base - at 450 nm Emission |
<= 0.3 ppb |
| Fluorescence Trace Impurities, measured as Quinine Base - at Emission Maximum for Impurities |
<= 1.0 ppb |
| Color (APHA) |
<= 10 |
| Residue after Evaporation |
<= 0.8 ppm |
| Water (H2O) |
<= 100 ppm |
| LC/MS Suitability - Largest Response on ESI- Positive Mode (as Reserpine) |
<= 25.0 ppb |
| LC/MS Suitability - Largest Response on ESI- Negative Mode (as 4-Nitrophenol) |
<= 25.0 ppb |
| Trace Impurities - Aluminum (Al) |
<= 25.0 ppb |
| Trace Impurities - Calcium (Ca) |
<= 25.0 ppb |
| Trace Impurities - Chromium (Cr) |
<= 5.0 ppb |
| Trace Impurities - Cobalt (Co) |
<= 5.0 ppb |
| Trace Impurities - Copper (Cu) |
<= 5.0 ppb |
| Trace Impurities - Iron (Fe) |
<= 5.0 ppb |
| Trace Impurities - Lead (Pb) |
<= 5.0 ppb |
| Trace Impurities - Lithium (Li) |
<= 5.0 ppb |
| Trace Impurities - Magnesium (Mg) |
<= 10.0 ppb |
| Trace Impurities - Manganese (Mn) |
<= 5.0 ppb |
| Trace Impurities - Nickel (Ni) |
<= 5.0 ppb |
| Trace Impurities - Potassium (K) |
<= 10.0 ppb |
| Trace Impurities - Sodium (Na) |
<= 50.0 ppb |
| Trace Impurities - Tin (Sn) |
<= 5.0 ppb |
| Trace Impurities - Zinc (Zn) |
<= 10.0 ppb |
| Filtered through a 0.1 micron filter. |
| CAS Number |
75-05-8 |
| IMO |
3:1648 |
| HTS Number |
2926905050 |
| Density |
1L = 0.79kg |
| Flash Point |
2.00°C |
| Management of Change |
N |