Vibrasorb® Vibration Damping Mount
You have not viewed any products recently.
View Larger
- There are no alternate images available for this product.
- There are no alternate images available for this product.
Vibrasorb® Vibration Damping Mount
Chemical and Scratch Resistant Polished Surface
Vibrasorb® Vibration Damping Mounts facilitate optimal use and help protect electromechanical and optical equipment from excessive wear and even structural damage that can be caused by exposure to vibration.
- Polished surface resists scratches and chemical attack
- 6.4cm (2-1/2 inch) thick platforms; molded of dense black & white terrazzo
- Four Vibro-Absorber™ cushions with neoprene feet support up to 16kg (35lb)
- Larger size (B160-11) will absorb vibrations down to 13Hz with a 16kg (35lb) load; smaller size (B160-12) will absorb vibrations down to 16Hz. with a 16kg (35lb) load
- With lighter loads, the minimum frequency of damping for both sizes will increase to a value between 16Hz. and 25Hz
- Shipping weights: B160-11 large 39kg (87lb), B160-12 small 19kg (42lb)